LNS 12ft Magazine Bar Feeders
| |
|
|
|
|
|
| |
|
Alpha ST 212
|
|
| The LNS low cost solution
to load small diameter bar stock primarily for sliding
headstock lathes. The Alpha ST 212 offers a remarkable
number of unique features. Small diameter bar stock
presents a challenge for any magazine barfeeder.
Flexible bar material and hard to load small diameters
often result in multiple or no bar loading. The Alpha ST
212 is a highly productive and extremely economical
automatic bar feed system for round bar stock diameters
as small as .078” to .47” |
 |
|
Specifications
|
Alpha 212
|
|
Diameter
|
.079”
- .472” (2-12mm)
|
|
Bar length
|
12’
(3658 mm)
|
|
Loading system
|
Lateral/Screw
|
|
Loading capacity
|
20 Bars
|
|
Loading side
|
Front / Rear Load
|
|
Headstock type
|
Fixed / Sliding
|
|
Synchronisation
|
PLC / Servo-motor
|
|
Max. remnant length
|
15.75”
(400 mm)
|
|
Partial changeover
|
2 min
(in the same channels)
|
|
Total changeover
|
8 min
(in the same channels)
|
|
Front rest
|
Manual
|
|
Bar selection
|
Automatic
|
|
Motor
|
Servo
|
|
Drive
|
Chain
|
|
Guiding
|
Hydrodynamic U-Channel
|
|
| automatic magazine bar
feed for diameters from .078” to .47” (2mm to 12mm) Used
with sliding headstock lathes |
|
Alpha ST 320
|
|
| The LNS low cost solution
to load small diameter bar stock primarily for sliding
headstock lathes. The Alpha ST 320 offers a remarkable
number of unique features. Easy to adjust loading
fingers and outboard support assures positive bar
loading and maximum RPM capability. The Alpha ST 320 is
a highly productive and extremely economical automatic
bar feed system for round bar stock diameters from .12”
to .78”. |
 |
|
Specifications
|
Alpha 320
|
|
Diameter
|
ø 12”
- .78” (3-20mm)
|
|
Bar length
|
12’
(3658 mm)
|
|
Loading system
|
Lateral
|
|
Loading capacity
|
10”
(254
mm)
|
|
Loading side
|
Front/Rear Load
|
|
Headstock type
|
Fixed/Sliding
|
|
Synchronisation
|
PLC/Servo-motor
|
|
Max. remnant length
|
15.75”
(400 mm)
|
|
Partial changeover
|
2 min
(in the same channels)
|
|
Total changeover
|
8 min
(in the same channels)
|
|
Front rest
|
Manual
|
|
Bar selection
|
Automatic
|
|
Motor
|
Servo
|
|
Drive
|
Chain
|
|
Guiding
|
Hydrodynamic U-Channel
|
|
Options
|
|
|
Optional 3S direct spindle synchroniation system
|
|
Express 220
|
|
| The Express 220 is an
automatic magazine barfeeder designed for short, medium
and long production run. In its standard version the
Express 220 carries out 80% of the most frequent
applications. Due to its modular construction, the
Express 220 can quickly be equipped with options at any
given time. |
 |
|
Specifications
|
Express 220
|
|
Diameter
|
ø .079''
to .787'' (2mm –
20 mm)
|
|
|
ø 2 mm with specific bar
selection system (.079”)
|
|
|
ø 22
mm with bar preparation (.866”)
|
|
Bar length 3m/12'/4m
|
129.9”
/
151.6”
/
165.4”
(3300/3850/4200
mm)
|
|
Loading system
|
Side
load rack
|
|
Loading capacity
|
6” (160 mm)
|
|
Loading side
|
Right /
left
|
|
Headstock type
|
Fixed /
sliding
|
|
Synchronisation
|
PLC /
Servo-motor
|
|
Max. remnant length
|
15'' (381
mm)
|
|
Partial changeover
|
2 min
(in the same channels)
|
|
Total changeover
|
8 min
(for all guiding elements)
|
|
Front rest
|
Automatic
|
|
Bar selection
|
Automatic
|
|
Motor
|
Servo
|
|
Drive
|
Chain
|
|
Guiding
|
Hydrodynamic
U-Channel
|
|
Options
|
|
|
Specific ø.079” (2
mm) bar selection system
|
|
20'' (508 mm) Z axis retraction
|
|
Direct headstock synchronisation system "3S"
|
|
Express 332
|
|
| Automatic magazine
barfeeder designed for short, medium and long production
run. The conception of the Express 332 permits fast
diameter change over and very short set up times. The
hydrodynamic support in the guiding channels allows
optimal RPM without vibration on diameter range 3-32 mm. |
 |
|
Specifications
|
Express 332
|
|
Diameter
|
ø .125'' to 1.250'' (3 mm – 31.75 mm)
|
|
|
ø to 1.375'' (34.92 mm) with bar preparation
|
|
Bar length 3m/12'/4m
|
129.9''
/ 151.6'' / 165.4'' (3300/3850/4200
mm)
|
|
Loading system
|
Side load rack
|
|
Loading capacity
|
10.63''
(270 mm)
|
|
Loading side
|
Right / left
|
|
Headstock type
|
Fixed / sliding
|
|
Synchronisation
|
PLC / Servo-motor
|
|
Max. remnant length
|
20'' (508 mm)
|
|
Partial changeover
|
2 min (in the same channels)
|
|
Total changeover
|
8 min (for all guiding elements)
|
|
Front rest
|
Automatic
|
|
Bar selection
|
Automatic
|
|
Motor
|
Servo
|
|
Drive
|
Chain
|
|
Guiding
|
Hydrodynamic U-Channel
|
|
Option
|
|
|
Z axis retraction
|
20'' (508 mm)
|
|
Sprint 542
|
|
| The Sprint 542 automatic
bar feeder takes advantages of the proven concept of the
Sprint 565. This bar feeder allows maximum flexibility
in the range of 5-42 mm. The long and round guiding
elements offer optimal bar guiding performance for all
bar shapes. |
 |
|
Specifications
|
Sprint 542
|
|
Diameter
|
ø 5-42 mm (1/4“ – 1.65“)
|
|
Bar length 3m/12'/4m
|
3200/3800/4200 (125.9“/149.6“/165.3“)
|
|
Loading system
|
Side load rack
|
|
Loading capacity
|
280 mm
(11“)
|
|
Loading side
|
Front / rear
|
|
Headstock type
|
Fixe / sliding
|
|
Synchronisation
|
PLC / Servo-motor
|
|
Partial changeover
|
1 min (keeping the same bearing elements/with
remnant retract option)
|
|
Total changeover
|
Less than 10 mins (for all guiding elements)
|
|
Standard front rest
|
Fixed
|
|
Bar selection
|
Manual
|
|
Motor
|
Servo
|
|
Drive
|
Notched belt
|
|
Guiding
|
Hydrostatic/bearings
|
|
Options
|
|
|
Remnant retract
|
450 mm
max. length (17.7“)
|
|
Z axis retract
|
470 mm
(18.5)
|
|
2-position front rest
|
|
Automatic front rest
|
|
|
Tryton 112
|
|
| The Hydrobar Tryton 112 is
an automatic magazine barfeeder featuring high
performance for small diameter and is designed for
camshaft controlled screw machines and Swiss-style CNC
machines. The guiding technology on the Tryton is based
on a hydrodynamic support in totally enclosed guide
tubes. |
 |
|
Specifications
|
107 /112 cames
|
107 /112 CNC
|
|
Diameter
|
ø .039'' to .500'' (.99 –
1270 mm)
|
ø .039'' to .500'' (.99 –
1270 mm)
|
|
Bar length
2m/3m/12'/4m
|
126”
/
146” /
165.4”
(3200/3710/4200
mm)
|
82.68 ”
/ 126” / 146” / 165.4” ( 2100/3200/3710/4200
mm)
|
|
Loading system
|
Barrel
|
Barrel
|
|
Loading capacity
|
45 ( .039''-.197'') (1-5 mm)
|
45 ( .039''-.197'') (1-5 mm)
|
|
|
36
( .039''-.276'') ( 1-7
mm)
|
36 ( .039''-.276'') 1-7 mm)
|
|
|
24 ( .117''-.393'') (3-10
mm)
|
24 ( .117''-.393'') (3-10
mm)
|
|
|
24 ( .156''-.500'') (4-12.7
mm)
|
24 ( .156''-.500'') (4-12.7
mm)
|
|
Loading side
|
Right / left
|
Right / left
|
|
Partial changeover
|
2 min
|
2 min
|
|
|
(within the guide tube
range)
|
(within the guide tube
range)
|
|
Total changeover
|
5-10 min
|
5-10 min
|
|
|
(with hybrid barrel)
|
(with hybrid barrel)
|
|
Drive
|
Hydraulic pressure
|
Hydraulic pressure
|
|
Guiding
|
Hydrodynamic tube
|
Hydrodynamic tube
|
|
Options
|
|
|
|
Hybrid barrels
|
2x14 barstocks, .039” - .393”
(ø 1-10 mm)
|
2x14 barstocks, .039” - .393”
(ø 1-10 mm)
|
|
Hybrid barrels
|
2x14 barstocks, .039”-.500”
(ø 1-12.7 mm)
|
2x14 barstocks, .039” - .500”
(ø 1-12.7
mm)
|
|
Barfeed swing out
system
|
|
|
|
|
|
|
|
|
|
